3/21/2024 0 Comments Cloning hard drive to ssdClick on Next and follow with the rest of the wizard to initiate the cloning process. This is the partition that holds the operating system.ĥ. In this case, you can uncheck the partitions on the right of the main partition, which always contain (C:) in its name. then pick the SSD, which is connected to the computer via an USB port.Įxtra note: Here you can verify to make sure both drives share the same drive format type (GPT or MBR.) Also, if the existing hard drive has many small partitions and you use an SSD that's of smaller capacity, you might run into an error saying not all partitions can fit on the SSD. In Clone window, click on Select a disk to clone to. Under the graphic of the existing computer, click on Clone this disk. Once the installation is done, double click on the Reflect icon on the Desktop of the computer.ģ. Download and install Macrium Refelct Free.Ģ. Macrium Reflect allows for cloning a drive without having to include all of the source drive's partitions. The idea is that you clone the existing hard drive into the SSD, retaining all settings.) With other versions or other cloning software, the steps will be slightly different, so follow the software's instructions, but it should be easy enough to understand. (Note that the steps given below are for Macrium Reflect. Plug the SSD into a USB port of the computer using the USB-to-SATA cable. Now that you have everything you need, let's get the process started. depending on the amount of drives you have on the machine.) Right click on the SSD then choose "Convert to GPT" (if it's currently uses MBR), or "Convert to MBR" (if it's currently uses GPT.) Just make sure it shares the same drive format type as the existing hard drive. In Disk Management window, find the SSD which will be shown as Disk 1 (or Disk 2 etc. At the command prompt window, type in diskmgmt then press Enter. Screenshot by Dong Ngo/CNETĪnd here's how to make sure the SSD has the same drive format type:Ģ. It's easy to convert a drive from MBR to GPT and vice versa. If you're using a brand new SSD, you can skip this step and move straight to the cloning process. This step is only necessary if you want to use a hand-me-down SSD (one that's been formatted before) to replace your existing hard drive on your computer. Generally, a standard small Phillips-head one will do. Pick one that works with the screws on your computer. Note that for a desktop, as an option, you can skip this adapter and install the SSD as a secondary internal drive for the cloning process, which works much faster than connecting via USB.Īnd finally, you'll need a small screwdriver. If you have a Seagate GoFlex external hard drive (a portable or desktop version), you can use the adapter part of the drive for the job. These adapters can be found online for around $15 or so. The third thing you need is a USB-to-SATA adapter. It also supports all types of hard drive formats. This software allows you to clone the existing drive to a new one without even restarting the computer. There are many of them on the market and most of them work well (some SSDs come with this software installed) but my favorite for the job is the free version of Macrium Reflect. The second thing you need is cloning software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |